İçindekiler
Fusion3 EDGE 3D yazıcısının teknik özellikleri, OctoPrint, Mainsail, Fluidd ve SimplyPrint ile uyumlu olup olmadığı ve her birinin nasıl kurulacağı hakkında her şeyi öğrenin.
Fusion3 EDGE için yazıcı uyumluluğu
Fusion3 EDGE 3D yazıcı OctoPrint, Mainsail, Fluidd ve SimplyPrint ile çalışır mı?
Yazıcınızın OctoPrint, Mainsail, Fluidd veya SimplyPrint ile çalışıp çalışmadığını anlamak, özellikle 3D baskıya yeniyseniz, zorlu bir iş olabilir; çünkü ortada binlerce yazıcı modeli var.
Şu soruyu yanıtlayarak işinizi biraz kolaylaştırmak için buradayız; Fusion3 EDGE OctoPrint, Mainsail, Fluidd ve SimplyPrint ile uyumlu mu?
Bir hata mı yaptık? Bu verilerden herhangi biri yanlış mı? Bize bildirin!
Fusion3 EDGE için hangi slicer kullanılmalı
Find the best slicing software for your Fusion3 EDGE 3D printer.
Compatible Slicers for Fusion3 EDGE
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Fusion3 EDGE. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the Fusion3 EDGE.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by Fusion3—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Fusion3 EDGE
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Fusion3 EDGE. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Fusion3 EDGE print?
A guide to the materials the Fusion3 EDGE can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Notlar |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | The high-temperature hotend and hot bed handle ABS and ASA well. An enclosure helps further on large parts. |
| Nylon (PA) | İyi | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | İyi | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Fusion3 EDGE yazıcı özellikleri: tabla türü, boyut, baskı yüksekliği ve daha fazlası
Fusion3 EDGE 3D yazıcı modelinin temel özelliklerini keşfedin. Tabla türünden boyutuna, baskı yüksekliğine ve daha fazlasına kadar, yazıcının özelliklerini anlamanıza yardımcı olacak ayrıntılı teknik bilgiler sunuyoruz.
| Teknik özellik | Ayrıntılar |
|---|---|
| Yazıcı modeli adı | EDGE |
| Yazıcı üreticisi / markası | Fusion3 |
| Tabla türü | Square |
| Tabla boyutu | 368 x 368 mm |
| Maks. baskı yüksekliği | 343mm |
| Isıtmalı tablası var | Evet |
| Maks. ekstruder sıcaklığı | 320° |
| Maks. tabla sıcaklığı | 140° |
| Filament genişliği | 1.75mm |
| Nozül sayısı | 1 |
| Prob aracı / otomatik tabla dengeleme | Evet |
| Direct drive | Hayır |
| Supports serial printing | Evet |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Bir hata mı yaptık? Bu verilerden herhangi biri yanlış mı? Bize bildirin!
Sık sorulan sorular
Is the Fusion3 EDGE compatible with SimplyPrint?
Yes. You can connect the Fusion3 EDGE to SimplyPrint via OctoPrint or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Fusion3 EDGE?
Cura, PrusaSlicer and OrcaSlicer all work with the Fusion3 EDGE, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the Fusion3 EDGE print?
Based on its specs (hotend up to 320C, heated bed up to 140C), the Fusion3 EDGE handles PLA, PETG, ABS & ASA or Nylon (PA) well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Fusion3 EDGE work with OctoPrint or Klipper?
The Fusion3 EDGE works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Fusion3 EDGE's build volume?
The Fusion3 EDGE has a build volume of about 368 x 368 x 343 mm. See the full specifications table above for bed type, temperatures and more.
Son sözler
Fusion3 EDGE bilgi kılavuzumuzun sonuna geldik. Kapsamlı, güvenilir bilgiyi tek bir yerde bulmanın zorluğunun farkında olarak, mümkün olduğunca çok 3D yazıcı hakkında araştırma yapmaya ve veri toplamaya önemli ölçüde zaman ayırıyoruz. Öncelikli odağımız, belirli yazıcıların en popüler 3D baskı istemcileriyle uyumluluğu hakkında bilgi sağlamaktır. Umarız bu kılavuz sorularınızı yanıtlamaya yardımcı olmuştur!