Innehållsförteckning
Lär dig allt om specifikationerna för 3D-skrivaren Tenlog Hands 2 IDEX, om den är kompatibel med OctoPrint, Mainsail, Fluidd och SimplyPrint, och hur du konfigurerar var och en av dem.
Skrivarkompatibilitet för Tenlog Hands 2 IDEX
Fungerar 3D-skrivaren Tenlog Hands 2 IDEX med OctoPrint, Mainsail, Fluidd och SimplyPrint?
Att ta reda på om just din skrivare fungerar med OctoPrint, Mainsail, Fluidd eller SimplyPrint kan vara en utmaning, särskilt om du är ny inom 3D-utskrift, eftersom det finns tusentals skrivare där ute.
Vi finns här för att göra det lite enklare för dig genom att besvara frågan: är Tenlog Hands 2 IDEX kompatibel med OctoPrint, Mainsail, Fluidd och SimplyPrint?
Gjorde vi ett misstag? Är någon av uppgifterna fel? Säg till!
Vilken slicer du ska använda för Tenlog Hands 2 IDEX
Find the best slicing software for your Tenlog Hands 2 IDEX 3D printer.
Compatible Slicers for Tenlog Hands 2 IDEX
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Tenlog Hands 2 IDEX. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the Tenlog Hands 2 IDEX.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by Tenlog—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Tenlog Hands 2 IDEX
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Tenlog Hands 2 IDEX. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Tenlog Hands 2 IDEX print?
A guide to the materials the Tenlog Hands 2 IDEX can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Anteckningar |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | With care | Borderline - the bed runs a little cool and an enclosure is essential for ABS and ASA. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tenlog Hands 2 IDEX-skrivarspecifikationer: bäddtyp, storlek, utskriftshöjd och mer
Upptäck nyckelfunktionerna hos 3D-skrivarmodellen Tenlog Hands 2 IDEX. Från bäddtyp till storlek, utskriftshöjd och mer, tillhandahåller vi detaljerade specifikationer som hjälper dig förstå skrivarens kapacitet.
| Specifikation | Detaljer |
|---|---|
| Skrivarmodellnamn | Hands 2 IDEX |
| Skrivartillverkare / märke | Tenlog |
| Bäddtyp | Square |
| Bäddstorlek | 220 x 220 mm |
| Max utskriftshöjd | 250mm |
| Har uppvärmd bädd | Ja |
| Max extrudertemperatur | 250° |
| Max bäddtemperatur | 80° |
| Filamentbredd | 1.75mm |
| Antal munstycken | 1 |
| Sonderingsverktyg / automatisk bäddnivellering | Nej |
| Direct drive | Ja |
| Supports serial printing | Ja |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Gjorde vi ett misstag? Är någon av uppgifterna fel? Säg till!
Vanliga frågor
Is the Tenlog Hands 2 IDEX compatible with SimplyPrint?
Yes. You can connect the Tenlog Hands 2 IDEX to SimplyPrint via OctoPrint or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Tenlog Hands 2 IDEX?
Cura, PrusaSlicer and OrcaSlicer all work with the Tenlog Hands 2 IDEX, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the Tenlog Hands 2 IDEX print?
Based on its specs (hotend up to 250C, heated bed up to 80C), the Tenlog Hands 2 IDEX handles PLA, PETG or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Tenlog Hands 2 IDEX work with OctoPrint or Klipper?
The Tenlog Hands 2 IDEX works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Tenlog Hands 2 IDEX's build volume?
The Tenlog Hands 2 IDEX has a build volume of about 220 x 220 x 250 mm. See the full specifications table above for bed type, temperatures and more.
Avslutande ord
Vi har nått slutet på vår informationsguide om Tenlog Hands 2 IDEX. Vi lägger ner mycket tid på att undersöka och samla in data om så många 3D-skrivare som möjligt, och förstår utmaningen i att hitta heltäckande och pålitlig information på ett och samma ställe. Vårt huvudfokus är att ge insikt i hur väl specifika skrivare fungerar med de mest populära 3D-utskriftsklienterna. Vi hoppas att den här guiden har hjälpt till att besvara dina frågor!