Innehållsförteckning
Lär dig allt om specifikationerna för 3D-skrivaren printrbot Simple Metal, om den är kompatibel med OctoPrint, Mainsail, Fluidd och SimplyPrint, och hur du konfigurerar var och en av dem.
Skrivarkompatibilitet för printrbot Simple Metal
Fungerar 3D-skrivaren printrbot Simple Metal med OctoPrint, Mainsail, Fluidd och SimplyPrint?
Att ta reda på om just din skrivare fungerar med OctoPrint, Mainsail, Fluidd eller SimplyPrint kan vara en utmaning, särskilt om du är ny inom 3D-utskrift, eftersom det finns tusentals skrivare där ute.
Vi finns här för att göra det lite enklare för dig genom att besvara frågan: är printrbot Simple Metal kompatibel med OctoPrint, Mainsail, Fluidd och SimplyPrint?
Gjorde vi ett misstag? Är någon av uppgifterna fel? Säg till!
Vilken slicer du ska använda för printrbot Simple Metal
Find the best slicing software for your printrbot Simple Metal 3D printer.
Compatible Slicers for printrbot Simple Metal
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the printrbot Simple Metal. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the printrbot Simple Metal.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by printrbot—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for printrbot Simple Metal
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your printrbot Simple Metal. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the printrbot Simple Metal print?
A guide to the materials the printrbot Simple Metal can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Anteckningar |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | The high-temperature hotend and hot bed handle ABS and ASA well. An enclosure helps further on large parts. |
| Nylon (PA) | Bra | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
printrbot Simple Metal-skrivarspecifikationer: bäddtyp, storlek, utskriftshöjd och mer
Upptäck nyckelfunktionerna hos 3D-skrivarmodellen printrbot Simple Metal. Från bäddtyp till storlek, utskriftshöjd och mer, tillhandahåller vi detaljerade specifikationer som hjälper dig förstå skrivarens kapacitet.
| Specifikation | Detaljer |
|---|---|
| Skrivarmodellnamn | Simple Metal |
| Skrivartillverkare / märke | printrbot |
| Bäddtyp | Square |
| Bäddstorlek | 150 x 150 mm |
| Max utskriftshöjd | 150mm |
| Har uppvärmd bädd | Ja |
| Max extrudertemperatur | 280° |
| Max bäddtemperatur | 100° |
| Filamentbredd | 1.75mm |
| Antal munstycken | 1 |
| Sonderingsverktyg / automatisk bäddnivellering | Ja |
| Direct drive | Ja |
| Supports serial printing | Ja |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Gjorde vi ett misstag? Är någon av uppgifterna fel? Säg till!
Vanliga frågor
Is the printrbot Simple Metal compatible with SimplyPrint?
Yes. You can connect the printrbot Simple Metal to SimplyPrint via OctoPrint or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the printrbot Simple Metal?
Cura, PrusaSlicer and OrcaSlicer all work with the printrbot Simple Metal, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the printrbot Simple Metal print?
Based on its specs (hotend up to 280C, heated bed up to 100C), the printrbot Simple Metal handles PLA, PETG, TPU & flexibles or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the printrbot Simple Metal work with OctoPrint or Klipper?
The printrbot Simple Metal works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the printrbot Simple Metal's build volume?
The printrbot Simple Metal has a build volume of about 150 x 150 x 150 mm. See the full specifications table above for bed type, temperatures and more.
Avslutande ord
Vi har nått slutet på vår informationsguide om printrbot Simple Metal. Vi lägger ner mycket tid på att undersöka och samla in data om så många 3D-skrivare som möjligt, och förstår utmaningen i att hitta heltäckande och pålitlig information på ett och samma ställe. Vårt huvudfokus är att ge insikt i hur väl specifika skrivare fungerar med de mest populära 3D-utskriftsklienterna. Vi hoppas att den här guiden har hjälpt till att besvara dina frågor!