Innehållsförteckning
Lär dig allt om specifikationerna för 3D-skrivaren MakerGear M3 Dual, om den är kompatibel med OctoPrint, Mainsail, Fluidd och SimplyPrint, och hur du konfigurerar var och en av dem.
Skrivarkompatibilitet för MakerGear M3 Dual
Fungerar 3D-skrivaren MakerGear M3 Dual med OctoPrint, Mainsail, Fluidd och SimplyPrint?
Att ta reda på om just din skrivare fungerar med OctoPrint, Mainsail, Fluidd eller SimplyPrint kan vara en utmaning, särskilt om du är ny inom 3D-utskrift, eftersom det finns tusentals skrivare där ute.
Vi finns här för att göra det lite enklare för dig genom att besvara frågan: är MakerGear M3 Dual kompatibel med OctoPrint, Mainsail, Fluidd och SimplyPrint?
Gjorde vi ett misstag? Är någon av uppgifterna fel? Säg till!
Vilken slicer du ska använda för MakerGear M3 Dual
Find the best slicing software for your MakerGear M3 Dual 3D printer.
Compatible Slicers for MakerGear M3 Dual
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the MakerGear M3 Dual. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the MakerGear M3 Dual.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by MakerGear—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for MakerGear M3 Dual
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your MakerGear M3 Dual. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the MakerGear M3 Dual print?
A guide to the materials the MakerGear M3 Dual can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Anteckningar |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | The high-temperature hotend and hot bed handle ABS and ASA well. An enclosure helps further on large parts. |
| Nylon (PA) | Bra | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
MakerGear M3 Dual-skrivarspecifikationer: bäddtyp, storlek, utskriftshöjd och mer
Upptäck nyckelfunktionerna hos 3D-skrivarmodellen MakerGear M3 Dual. Från bäddtyp till storlek, utskriftshöjd och mer, tillhandahåller vi detaljerade specifikationer som hjälper dig förstå skrivarens kapacitet.
| Specifikation | Detaljer |
|---|---|
| Skrivarmodellnamn | M3 Dual |
| Skrivartillverkare / märke | MakerGear |
| Bäddtyp | Rectangle |
| Bäddstorlek | 203 x 232 mm |
| Max utskriftshöjd | 203mm |
| Har uppvärmd bädd | Ja |
| Max extrudertemperatur | 280° |
| Max bäddtemperatur | 100° |
| Filamentbredd | 1.75mm |
| Antal munstycken | 1 |
| Sonderingsverktyg / automatisk bäddnivellering | Nej |
| Direct drive | Ja |
| Supports serial printing | Ja |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Gjorde vi ett misstag? Är någon av uppgifterna fel? Säg till!
Vanliga frågor
Is the MakerGear M3 Dual compatible with SimplyPrint?
Yes. You can connect the MakerGear M3 Dual to SimplyPrint via OctoPrint or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the MakerGear M3 Dual?
Cura, PrusaSlicer and OrcaSlicer all work with the MakerGear M3 Dual, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the MakerGear M3 Dual print?
Based on its specs (hotend up to 280C, heated bed up to 100C), the MakerGear M3 Dual handles PLA, PETG, TPU & flexibles or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the MakerGear M3 Dual work with OctoPrint or Klipper?
The MakerGear M3 Dual works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the MakerGear M3 Dual's build volume?
The MakerGear M3 Dual has a build volume of about 203 x 232 x 203 mm. See the full specifications table above for bed type, temperatures and more.
Avslutande ord
Vi har nått slutet på vår informationsguide om MakerGear M3 Dual. Vi lägger ner mycket tid på att undersöka och samla in data om så många 3D-skrivare som möjligt, och förstår utmaningen i att hitta heltäckande och pålitlig information på ett och samma ställe. Vårt huvudfokus är att ge insikt i hur väl specifika skrivare fungerar med de mest populära 3D-utskriftsklienterna. Vi hoppas att den här guiden har hjälpt till att besvara dina frågor!