Innehållsförteckning
Lär dig allt om specifikationerna för 3D-skrivaren Fusion3 EDGE, om den är kompatibel med OctoPrint, Mainsail, Fluidd och SimplyPrint, och hur du konfigurerar var och en av dem.
Skrivarkompatibilitet för Fusion3 EDGE
Fungerar 3D-skrivaren Fusion3 EDGE med OctoPrint, Mainsail, Fluidd och SimplyPrint?
Att ta reda på om just din skrivare fungerar med OctoPrint, Mainsail, Fluidd eller SimplyPrint kan vara en utmaning, särskilt om du är ny inom 3D-utskrift, eftersom det finns tusentals skrivare där ute.
Vi finns här för att göra det lite enklare för dig genom att besvara frågan: är Fusion3 EDGE kompatibel med OctoPrint, Mainsail, Fluidd och SimplyPrint?
Gjorde vi ett misstag? Är någon av uppgifterna fel? Säg till!
Vilken slicer du ska använda för Fusion3 EDGE
Find the best slicing software for your Fusion3 EDGE 3D printer.
Compatible Slicers for Fusion3 EDGE
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Fusion3 EDGE. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the Fusion3 EDGE.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by Fusion3—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Fusion3 EDGE
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Fusion3 EDGE. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Fusion3 EDGE print?
A guide to the materials the Fusion3 EDGE can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Anteckningar |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | The high-temperature hotend and hot bed handle ABS and ASA well. An enclosure helps further on large parts. |
| Nylon (PA) | Bra | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Bra | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Fusion3 EDGE-skrivarspecifikationer: bäddtyp, storlek, utskriftshöjd och mer
Upptäck nyckelfunktionerna hos 3D-skrivarmodellen Fusion3 EDGE. Från bäddtyp till storlek, utskriftshöjd och mer, tillhandahåller vi detaljerade specifikationer som hjälper dig förstå skrivarens kapacitet.
| Specifikation | Detaljer |
|---|---|
| Skrivarmodellnamn | EDGE |
| Skrivartillverkare / märke | Fusion3 |
| Bäddtyp | Square |
| Bäddstorlek | 368 x 368 mm |
| Max utskriftshöjd | 343mm |
| Har uppvärmd bädd | Ja |
| Max extrudertemperatur | 320° |
| Max bäddtemperatur | 140° |
| Filamentbredd | 1.75mm |
| Antal munstycken | 1 |
| Sonderingsverktyg / automatisk bäddnivellering | Ja |
| Direct drive | Nej |
| Supports serial printing | Ja |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Gjorde vi ett misstag? Är någon av uppgifterna fel? Säg till!
Vanliga frågor
Is the Fusion3 EDGE compatible with SimplyPrint?
Yes. You can connect the Fusion3 EDGE to SimplyPrint via OctoPrint or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Fusion3 EDGE?
Cura, PrusaSlicer and OrcaSlicer all work with the Fusion3 EDGE, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the Fusion3 EDGE print?
Based on its specs (hotend up to 320C, heated bed up to 140C), the Fusion3 EDGE handles PLA, PETG, ABS & ASA or Nylon (PA) well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Fusion3 EDGE work with OctoPrint or Klipper?
The Fusion3 EDGE works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Fusion3 EDGE's build volume?
The Fusion3 EDGE has a build volume of about 368 x 368 x 343 mm. See the full specifications table above for bed type, temperatures and more.
Avslutande ord
Vi har nått slutet på vår informationsguide om Fusion3 EDGE. Vi lägger ner mycket tid på att undersöka och samla in data om så många 3D-skrivare som möjligt, och förstår utmaningen i att hitta heltäckande och pålitlig information på ett och samma ställe. Vårt huvudfokus är att ge insikt i hur väl specifika skrivare fungerar med de mest populära 3D-utskriftsklienterna. Vi hoppas att den här guiden har hjälpt till att besvara dina frågor!