Innehållsförteckning
Lär dig allt om specifikationerna för 3D-skrivaren Anycubic Mega Zero, om den är kompatibel med OctoPrint, Mainsail, Fluidd och SimplyPrint, och hur du konfigurerar var och en av dem.
Skrivarkompatibilitet för Anycubic Mega Zero
Fungerar 3D-skrivaren Anycubic Mega Zero med OctoPrint, Mainsail, Fluidd och SimplyPrint?
Att ta reda på om just din skrivare fungerar med OctoPrint, Mainsail, Fluidd eller SimplyPrint kan vara en utmaning, särskilt om du är ny inom 3D-utskrift, eftersom det finns tusentals skrivare där ute.
Vi finns här för att göra det lite enklare för dig genom att besvara frågan: är Anycubic Mega Zero kompatibel med OctoPrint, Mainsail, Fluidd och SimplyPrint?
Gjorde vi ett misstag? Är någon av uppgifterna fel? Säg till!
Vilken slicer du ska använda för Anycubic Mega Zero
Find the best slicing software for your Anycubic Mega Zero 3D printer.
Compatible Slicers for Anycubic Mega Zero
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Anycubic Mega Zero. We are working on adding support for more slicers for our online cloud-based slicer.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Anycubic Mega Zero: Use PrusaSlicer Online
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Anycubic Mega Zero. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Anycubic Mega Zero print?
A guide to the materials the Anycubic Mega Zero can handle, based on its hotend specs.
| Filament | Suitability | Anteckningar |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Anycubic Mega Zero-skrivarspecifikationer: bäddtyp, storlek, utskriftshöjd och mer
Upptäck nyckelfunktionerna hos 3D-skrivarmodellen Anycubic Mega Zero. Från bäddtyp till storlek, utskriftshöjd och mer, tillhandahåller vi detaljerade specifikationer som hjälper dig förstå skrivarens kapacitet.
| Specifikation | Detaljer |
|---|---|
| Skrivarmodellnamn | Mega Zero |
| Skrivartillverkare / märke | Anycubic |
| Bäddtyp | Square |
| Bäddstorlek | 220 x 220 mm |
| Max utskriftshöjd | 250mm |
| Har uppvärmd bädd | Nej |
| Max extrudertemperatur | 255° |
| Filamentbredd | 1.75mm |
| Antal munstycken | 1 |
| Sonderingsverktyg / automatisk bäddnivellering | Nej |
| Direct drive | Nej |
| Supports serial printing | Ja |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Gjorde vi ett misstag? Är någon av uppgifterna fel? Säg till!
Vanliga frågor
Is the Anycubic Mega Zero compatible with SimplyPrint?
Yes. You can connect the Anycubic Mega Zero to SimplyPrint via OctoPrint or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Anycubic Mega Zero?
We recommend PrusaSlicer for the Anycubic Mega Zero. You can run it (plus Cura, PrusaSlicer and OrcaSlicer) directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Anycubic Mega Zero kept up to date automatically.
What filament can the Anycubic Mega Zero print?
Based on its specs (hotend up to 255C, no heated bed), the Anycubic Mega Zero handles PLA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Anycubic Mega Zero work with OctoPrint or Klipper?
The Anycubic Mega Zero works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Anycubic Mega Zero's build volume?
The Anycubic Mega Zero has a build volume of about 220 x 220 x 250 mm. See the full specifications table above for bed type, temperatures and more.
Avslutande ord
Vi har nått slutet på vår informationsguide om Anycubic Mega Zero. Vi lägger ner mycket tid på att undersöka och samla in data om så många 3D-skrivare som möjligt, och förstår utmaningen i att hitta heltäckande och pålitlig information på ett och samma ställe. Vårt huvudfokus är att ge insikt i hur väl specifika skrivare fungerar med de mest populära 3D-utskriftsklienterna. Vi hoppas att den här guiden har hjälpt till att besvara dina frågor!