Innehållsförteckning
Lär dig allt om specifikationerna för 3D-skrivaren Anycubic Kobra S1, om den är kompatibel med OctoPrint, Mainsail, Fluidd och SimplyPrint, och hur du konfigurerar var och en av dem.
Skrivarkompatibilitet för Anycubic Kobra S1
Fungerar 3D-skrivaren Anycubic Kobra S1 med OctoPrint, Mainsail, Fluidd och SimplyPrint?
Att ta reda på om just din skrivare fungerar med OctoPrint, Mainsail, Fluidd eller SimplyPrint kan vara en utmaning, särskilt om du är ny inom 3D-utskrift, eftersom det finns tusentals skrivare där ute.
Vi finns här för att göra det lite enklare för dig genom att besvara frågan: är Anycubic Kobra S1 kompatibel med OctoPrint, Mainsail, Fluidd och SimplyPrint?
Gjorde vi ett misstag? Är någon av uppgifterna fel? Säg till!
Var du köper Anycubic Kobra S1
Find the best deals and prices for the Anycubic Kobra S1
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
Vilken slicer du ska använda för Anycubic Kobra S1
Find the best slicing software for your Anycubic Kobra S1 3D printer.
Compatible Slicers for Anycubic Kobra S1
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Anycubic Kobra S1. We are working on adding support for more slicers for our online cloud-based slicer.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Anycubic Kobra S1: Use OrcaSlicer Online
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Anycubic Kobra S1. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Anycubic Kobra S1 print?
A guide to the materials the Anycubic Kobra S1 can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Anteckningar |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | The high-temperature hotend and hot bed handle ABS and ASA well. An enclosure helps further on large parts. |
| Nylon (PA) | Bra | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Bra | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Anycubic Kobra S1-skrivarspecifikationer: bäddtyp, storlek, utskriftshöjd och mer
Upptäck nyckelfunktionerna hos 3D-skrivarmodellen Anycubic Kobra S1. Från bäddtyp till storlek, utskriftshöjd och mer, tillhandahåller vi detaljerade specifikationer som hjälper dig förstå skrivarens kapacitet.
| Specifikation | Detaljer |
|---|---|
| Skrivarmodellnamn | Kobra S1 |
| Skrivartillverkare / märke | Anycubic |
| Bäddtyp | Square |
| Bäddstorlek | 250 x 250 mm |
| Max utskriftshöjd | 250mm |
| Har uppvärmd bädd | Ja |
| Max extrudertemperatur | 320° |
| Max bäddtemperatur | 120° |
| Filamentbredd | 1.75mm |
| Antal munstycken | 1 |
| Sonderingsverktyg / automatisk bäddnivellering | Ja |
| Direct drive | Ja |
| Supports serial printing | Nej |
| Shipped firmware | Klipper |
| Has start options |
Ja
Available options: Bed Leveling, Vibration Compensation, Flow Calibration, Timelapse |
| Supported file formats | G-code (.gcode, .gco, .g) |
Gjorde vi ett misstag? Är någon av uppgifterna fel? Säg till!
Vanliga frågor
Is the Anycubic Kobra S1 compatible with SimplyPrint?
Yes. You can connect the Anycubic Kobra S1 to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Anycubic Kobra S1?
We recommend OrcaSlicer for the Anycubic Kobra S1. You can run it (plus Cura, PrusaSlicer and OrcaSlicer) directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Anycubic Kobra S1 kept up to date automatically.
What filament can the Anycubic Kobra S1 print?
Based on its specs (hotend up to 320C, heated bed up to 120C), the Anycubic Kobra S1 handles PLA, PETG, TPU & flexibles or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Anycubic Kobra S1 work with OctoPrint or Klipper?
The Anycubic Kobra S1 works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Anycubic Kobra S1's build volume?
The Anycubic Kobra S1 has a build volume of about 250 x 250 x 250 mm. See the full specifications table above for bed type, temperatures and more.
Avslutande ord
Vi har nått slutet på vår informationsguide om Anycubic Kobra S1. Vi lägger ner mycket tid på att undersöka och samla in data om så många 3D-skrivare som möjligt, och förstår utmaningen i att hitta heltäckande och pålitlig information på ett och samma ställe. Vårt huvudfokus är att ge insikt i hur väl specifika skrivare fungerar med de mest populära 3D-utskriftsklienterna. Vi hoppas att den här guiden har hjälpt till att besvara dina frågor!