Índice
Saiba tudo sobre as especificações da impressora 3D Raise3D E2, se ela é compatível com OctoPrint, Mainsail, Fluidd e SimplyPrint, e como configurar cada um deles.
Compatibilidade da impressora para Raise3D E2
A impressora 3D Raise3D E2 funciona com OctoPrint, Mainsail, Fluidd e SimplyPrint?
Descobrir se a sua impressora específica funciona com OctoPrint, Mainsail, Fluidd ou SimplyPrint pode ser uma tarefa desafiadora, especialmente se você é novo na impressão 3D, já que existem milhares de impressoras diferentes por aí.
Estamos aqui para facilitar um pouco as coisas para você, respondendo à pergunta: a Raise3D E2 é compatível com OctoPrint, Mainsail, Fluidd e SimplyPrint?
Cometemos algum erro? Algum destes dados está incorreto? Avise-nos!
Sem compatibilidade atual
Infelizmente, até onde sabemos, a Raise3D E2 não é compatível atualmente com o OctoPrint, Mainsail, Fluidd ou SimplyPrint. Para a melhor experiência de impressão 3D, considere outras impressoras 3D compatíveis com esses softwares.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
Que slicer usar para a Raise3D E2
Find the best slicing software for your Raise3D E2 3D printer.
Compatible Slicers for Raise3D E2
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Raise3D E2. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the Raise3D E2.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by Raise3D—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Raise3D E2
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Raise3D E2. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Raise3D E2 print?
A guide to the materials the Raise3D E2 can handle, based on its hotend and heated bed specs.
| Filamento | Suitability | Notas |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | The high-temperature hotend and hot bed handle ABS and ASA well. An enclosure helps further on large parts. |
| Nylon (PA) | Bom | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Bom | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Especificações da impressora Raise3D E2: tipo de mesa, tamanho, altura de impressão e mais
Descubra os principais recursos do modelo de impressora 3D Raise3D E2. Do tipo de mesa ao tamanho, altura de impressão e muito mais, fornecemos especificações detalhadas para ajudar você a entender as capacidades da impressora.
| Especificação | Detalhes |
|---|---|
| Nome do modelo de impressora | E2 |
| Fabricante / marca da impressora | Raise3D |
| Tipo de mesa | Rectangle |
| Tamanho da mesa | 330 x 240 mm |
| Altura máxima de impressão | 240mm |
| Tem mesa aquecida | Sim |
| Temperatura máxima do extrusor | 300° |
| Temperatura máxima da mesa | 110° |
| Largura do filamento | 1.75mm |
| Número de bicos | 1 |
| Ferramenta de sondagem / Nivelamento automático de mesa | Sim |
| Direct drive | Não |
| Supports serial printing | Sim |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Cometemos algum erro? Algum destes dados está incorreto? Avise-nos!
Perguntas frequentes
Is the Raise3D E2 compatible with SimplyPrint?
To our knowledge the Raise3D E2 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the Raise3D E2?
Cura, PrusaSlicer and OrcaSlicer all work with the Raise3D E2, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the Raise3D E2 print?
Based on its specs (hotend up to 300C, heated bed up to 110C), the Raise3D E2 handles PLA, PETG, ABS & ASA or Nylon (PA) well. See the full filament guide above for ABS, nylon, PC and composites.
What is the Raise3D E2's build volume?
The Raise3D E2 has a build volume of about 330 x 240 x 240 mm. See the full specifications table above for bed type, temperatures and more.
Palavras finais
Chegamos ao fim do nosso guia de informações sobre a Raise3D E2. Dedicamos bastante tempo pesquisando e reunindo dados sobre o máximo de impressoras 3D possível, cientes de como é difícil encontrar informações completas e confiáveis em um só lugar. Nosso foco principal é fornecer informações sobre a compatibilidade de impressoras específicas com os clientes de impressão 3D mais populares. Esperamos que este guia tenha ajudado a responder suas perguntas!