Spis treści
Poznaj pełną specyfikację drukarki 3D SeeMeCNC Artemis 300, sprawdź jej zgodność z OctoPrint, Mainsail, Fluidd i SimplyPrint oraz dowiedz się, jak skonfigurować każde z nich.
Zgodność drukarki SeeMeCNC Artemis 300
Czy drukarka 3D SeeMeCNC Artemis 300 działa z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Ustalenie, czy dana drukarka działa z OctoPrint, Mainsail, Fluidd lub SimplyPrint, bywa trudne, zwłaszcza dla początkujących w druku 3D, bo drukarek są tysiące.
Odpowiadamy na pytanie, aby to nieco ułatwić: czy SeeMeCNC Artemis 300 jest kompatybilny z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Jakiego slicera użyć do SeeMeCNC Artemis 300
Find the best slicing software for your SeeMeCNC Artemis 300 3D printer.
Compatible Slicers for SeeMeCNC Artemis 300
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the SeeMeCNC Artemis 300. We are working on adding support for more slicers for our online cloud-based slicer.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for SeeMeCNC Artemis 300: Use OrcaSlicer Online
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your SeeMeCNC Artemis 300. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the SeeMeCNC Artemis 300 print?
A guide to the materials the SeeMeCNC Artemis 300 can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Notatki |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | The high-temperature hotend and hot bed handle ABS and ASA well. An enclosure helps further on large parts. |
| Nylon (PA) | Dobrze | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Specyfikacja drukarki SeeMeCNC Artemis 300: typ stołu, rozmiar, wysokość druku i więcej
Poznaj najważniejsze cechy drukarki 3D SeeMeCNC Artemis 300. Od typu stołu po rozmiar, wysokość druku i więcej, podajemy szczegółową specyfikację ułatwiającą zrozumienie możliwości drukarki.
| Specyfikacja | Szczegóły |
|---|---|
| Nazwa modelu drukarki | Artemis 300 |
| Producent / marka drukarki | SeeMeCNC |
| Typ stołu | Circle |
| Rozmiar stołu | 290 mm Średnica |
| Maks. wysokość druku | 500mm |
| Ma podgrzewany stół | Tak |
| Maksymalna temperatura ekstrudera | 280° |
| Maksymalna temperatura stołu | 117° |
| Szerokość filamentu | 1.75mm |
| Liczba dysz | 1 |
| Sonda / automatyczne poziomowanie stołu | Tak |
| Direct drive | Nie |
| Supports serial printing | Tak |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Najczęściej zadawane pytania
Is the SeeMeCNC Artemis 300 compatible with SimplyPrint?
Yes. You can connect the SeeMeCNC Artemis 300 to SimplyPrint via OctoPrint or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the SeeMeCNC Artemis 300?
We recommend OrcaSlicer for the SeeMeCNC Artemis 300. You can run it (plus Cura, PrusaSlicer and OrcaSlicer) directly in SimplyPrint's online slicer - no install, on any device, with profiles for the SeeMeCNC Artemis 300 kept up to date automatically.
What filament can the SeeMeCNC Artemis 300 print?
Based on its specs (hotend up to 280C, heated bed up to 117C), the SeeMeCNC Artemis 300 handles PLA, PETG, ABS & ASA or Nylon (PA) well. See the full filament guide above for ABS, nylon, PC and composites.
Does the SeeMeCNC Artemis 300 work with OctoPrint or Klipper?
The SeeMeCNC Artemis 300 works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the SeeMeCNC Artemis 300's build volume?
The SeeMeCNC Artemis 300 has a build volume of about 290 x 290 x 500 mm. See the full specifications table above for bed type, temperatures and more.
Na zakończenie
To już koniec przewodnika o SeeMeCNC Artemis 300. Poświęcamy wiele czasu na badania i gromadzenie danych o jak największej liczbie drukarek 3D, mając świadomość, jak trudno znaleźć wyczerpujące i wiarygodne informacje w jednym miejscu. Skupiamy się przede wszystkim na kompatybilności konkretnych drukarek z najpopularniejszymi programami do druku 3D. Mamy nadzieję, że ten przewodnik pomógł znaleźć odpowiedzi!