Spis treści
Poznaj pełną specyfikację drukarki 3D Raise3D Pro2, sprawdź jej zgodność z OctoPrint, Mainsail, Fluidd i SimplyPrint oraz dowiedz się, jak skonfigurować każde z nich.
Zgodność drukarki Raise3D Pro2
Czy drukarka 3D Raise3D Pro2 działa z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Ustalenie, czy dana drukarka działa z OctoPrint, Mainsail, Fluidd lub SimplyPrint, bywa trudne, zwłaszcza dla początkujących w druku 3D, bo drukarek są tysiące.
Odpowiadamy na pytanie, aby to nieco ułatwić: czy Raise3D Pro2 jest kompatybilny z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Jakiego slicera użyć do Raise3D Pro2
Find the best slicing software for your Raise3D Pro2 3D printer.
Compatible Slicers for Raise3D Pro2
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Raise3D Pro2. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the Raise3D Pro2.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by Raise3D—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Raise3D Pro2
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Raise3D Pro2. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Raise3D Pro2 print?
A guide to the materials the Raise3D Pro2 can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Notatki |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | The high-temperature hotend and hot bed handle ABS and ASA well. An enclosure helps further on large parts. |
| Nylon (PA) | Dobrze | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Dobrze | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Specyfikacja drukarki Raise3D Pro2: typ stołu, rozmiar, wysokość druku i więcej
Poznaj najważniejsze cechy drukarki 3D Raise3D Pro2. Od typu stołu po rozmiar, wysokość druku i więcej, podajemy szczegółową specyfikację ułatwiającą zrozumienie możliwości drukarki.
| Specyfikacja | Szczegóły |
|---|---|
| Nazwa modelu drukarki | Pro2 |
| Producent / marka drukarki | Raise3D |
| Typ stołu | Square |
| Rozmiar stołu | 305 x 305 mm |
| Maks. wysokość druku | 300mm |
| Ma podgrzewany stół | Tak |
| Maksymalna temperatura ekstrudera | 300° |
| Maksymalna temperatura stołu | 110° |
| Szerokość filamentu | 1.75mm |
| Liczba dysz | 1 |
| Sonda / automatyczne poziomowanie stołu | Nie |
| Direct drive | Nie |
| Supports serial printing | Tak |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Najczęściej zadawane pytania
Is the Raise3D Pro2 compatible with SimplyPrint?
Yes. You can connect the Raise3D Pro2 to SimplyPrint via OctoPrint or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Raise3D Pro2?
Cura, PrusaSlicer and OrcaSlicer all work with the Raise3D Pro2, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the Raise3D Pro2 print?
Based on its specs (hotend up to 300C, heated bed up to 110C), the Raise3D Pro2 handles PLA, PETG, ABS & ASA or Nylon (PA) well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Raise3D Pro2 work with OctoPrint or Klipper?
The Raise3D Pro2 works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Raise3D Pro2's build volume?
The Raise3D Pro2 has a build volume of about 305 x 305 x 300 mm. See the full specifications table above for bed type, temperatures and more.
Na zakończenie
To już koniec przewodnika o Raise3D Pro2. Poświęcamy wiele czasu na badania i gromadzenie danych o jak największej liczbie drukarek 3D, mając świadomość, jak trudno znaleźć wyczerpujące i wiarygodne informacje w jednym miejscu. Skupiamy się przede wszystkim na kompatybilności konkretnych drukarek z najpopularniejszymi programami do druku 3D. Mamy nadzieję, że ten przewodnik pomógł znaleźć odpowiedzi!