Spis treści
Poznaj pełną specyfikację drukarki 3D Pantheon HS3, sprawdź jej zgodność z OctoPrint, Mainsail, Fluidd i SimplyPrint oraz dowiedz się, jak skonfigurować każde z nich.
Zgodność drukarki Pantheon HS3
Czy drukarka 3D Pantheon HS3 działa z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Ustalenie, czy dana drukarka działa z OctoPrint, Mainsail, Fluidd lub SimplyPrint, bywa trudne, zwłaszcza dla początkujących w druku 3D, bo drukarek są tysiące.
Odpowiadamy na pytanie, aby to nieco ułatwić: czy Pantheon HS3 jest kompatybilny z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Jakiego slicera użyć do Pantheon HS3
Find the best slicing software for your Pantheon HS3 3D printer.
Compatible Slicers for Pantheon HS3
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Pantheon HS3. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the Pantheon HS3.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by Pantheon—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Pantheon HS3
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Pantheon HS3. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Pantheon HS3 print?
A guide to the materials the Pantheon HS3 can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Notatki |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | The high-temperature hotend and hot bed handle ABS and ASA well. An enclosure helps further on large parts. |
| Nylon (PA) | Dobrze | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Dobrze | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Specyfikacja drukarki Pantheon HS3: typ stołu, rozmiar, wysokość druku i więcej
Poznaj najważniejsze cechy drukarki 3D Pantheon HS3. Od typu stołu po rozmiar, wysokość druku i więcej, podajemy szczegółową specyfikację ułatwiającą zrozumienie możliwości drukarki.
| Specyfikacja | Szczegóły |
|---|---|
| Nazwa modelu drukarki | HS3 |
| Producent / marka drukarki | Pantheon |
| Typ stołu | Square |
| Rozmiar stołu | 300 x 300 mm |
| Maks. wysokość druku | 300mm |
| Ma podgrzewany stół | Tak |
| Maksymalna temperatura ekstrudera | 500° |
| Maksymalna temperatura stołu | 130° |
| Szerokość filamentu | 1.75mm |
| Liczba dysz | 1 |
| Sonda / automatyczne poziomowanie stołu | Tak |
| Direct drive | Nie |
| Supports serial printing | Nie |
| Shipped firmware | Klipper |
| Supported file formats | G-code (.gcode, .gco, .g) |
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Najczęściej zadawane pytania
Is the Pantheon HS3 compatible with SimplyPrint?
Yes. You can connect the Pantheon HS3 to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Pantheon HS3?
Cura, PrusaSlicer and OrcaSlicer all work with the Pantheon HS3, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the Pantheon HS3 print?
Based on its specs (hotend up to 500C, heated bed up to 130C), the Pantheon HS3 handles PLA, PETG, ABS & ASA or Nylon (PA) well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Pantheon HS3 work with OctoPrint or Klipper?
The Pantheon HS3 works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Pantheon HS3's build volume?
The Pantheon HS3 has a build volume of about 300 x 300 x 300 mm. See the full specifications table above for bed type, temperatures and more.
Na zakończenie
To już koniec przewodnika o Pantheon HS3. Poświęcamy wiele czasu na badania i gromadzenie danych o jak największej liczbie drukarek 3D, mając świadomość, jak trudno znaleźć wyczerpujące i wiarygodne informacje w jednym miejscu. Skupiamy się przede wszystkim na kompatybilności konkretnych drukarek z najpopularniejszymi programami do druku 3D. Mamy nadzieję, że ten przewodnik pomógł znaleźć odpowiedzi!