Spis treści
Poznaj pełną specyfikację drukarki 3D Monoprice Maker Select Plus, sprawdź jej zgodność z OctoPrint, Mainsail, Fluidd i SimplyPrint oraz dowiedz się, jak skonfigurować każde z nich.
Zgodność drukarki Monoprice Maker Select Plus
Czy drukarka 3D Monoprice Maker Select Plus działa z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Ustalenie, czy dana drukarka działa z OctoPrint, Mainsail, Fluidd lub SimplyPrint, bywa trudne, zwłaszcza dla początkujących w druku 3D, bo drukarek są tysiące.
Odpowiadamy na pytanie, aby to nieco ułatwić: czy Monoprice Maker Select Plus jest kompatybilny z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Jakiego slicera użyć do Monoprice Maker Select Plus
Find the best slicing software for your Monoprice Maker Select Plus 3D printer.
Compatible Slicers for Monoprice Maker Select Plus
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Monoprice Maker Select Plus. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the Monoprice Maker Select Plus.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by Monoprice—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Monoprice Maker Select Plus
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Monoprice Maker Select Plus. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Monoprice Maker Select Plus print?
A guide to the materials the Monoprice Maker Select Plus can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Notatki |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Specyfikacja drukarki Monoprice Maker Select Plus: typ stołu, rozmiar, wysokość druku i więcej
Poznaj najważniejsze cechy drukarki 3D Monoprice Maker Select Plus. Od typu stołu po rozmiar, wysokość druku i więcej, podajemy szczegółową specyfikację ułatwiającą zrozumienie możliwości drukarki.
| Specyfikacja | Szczegóły |
|---|---|
| Nazwa modelu drukarki | Maker Select Plus |
| Producent / marka drukarki | Monoprice |
| Typ stołu | Square |
| Rozmiar stołu | 200 x 200 mm |
| Maks. wysokość druku | 180mm |
| Ma podgrzewany stół | Tak |
| Maksymalna temperatura ekstrudera | 240° |
| Maksymalna temperatura stołu | 70° |
| Szerokość filamentu | 1.75mm |
| Liczba dysz | 1 |
| Sonda / automatyczne poziomowanie stołu | Nie |
| Direct drive | Tak |
| Supports serial printing | Tak |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Najczęściej zadawane pytania
Is the Monoprice Maker Select Plus compatible with SimplyPrint?
Yes. You can connect the Monoprice Maker Select Plus to SimplyPrint via OctoPrint or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Monoprice Maker Select Plus?
Cura, PrusaSlicer and OrcaSlicer all work with the Monoprice Maker Select Plus, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the Monoprice Maker Select Plus print?
Based on its specs (hotend up to 240C, heated bed up to 70C), the Monoprice Maker Select Plus handles PLA, PETG or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Monoprice Maker Select Plus work with OctoPrint or Klipper?
The Monoprice Maker Select Plus works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Monoprice Maker Select Plus's build volume?
The Monoprice Maker Select Plus has a build volume of about 200 x 200 x 180 mm. See the full specifications table above for bed type, temperatures and more.
Na zakończenie
To już koniec przewodnika o Monoprice Maker Select Plus. Poświęcamy wiele czasu na badania i gromadzenie danych o jak największej liczbie drukarek 3D, mając świadomość, jak trudno znaleźć wyczerpujące i wiarygodne informacje w jednym miejscu. Skupiamy się przede wszystkim na kompatybilności konkretnych drukarek z najpopularniejszymi programami do druku 3D. Mamy nadzieję, że ten przewodnik pomógł znaleźć odpowiedzi!