Spis treści
Poznaj pełną specyfikację drukarki 3D IFactory3D One Pro, sprawdź jej zgodność z OctoPrint, Mainsail, Fluidd i SimplyPrint oraz dowiedz się, jak skonfigurować każde z nich.
Zgodność drukarki IFactory3D One Pro
Czy drukarka 3D IFactory3D One Pro działa z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Ustalenie, czy dana drukarka działa z OctoPrint, Mainsail, Fluidd lub SimplyPrint, bywa trudne, zwłaszcza dla początkujących w druku 3D, bo drukarek są tysiące.
Odpowiadamy na pytanie, aby to nieco ułatwić: czy IFactory3D One Pro jest kompatybilny z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Brak obecnej zgodności
Niestety model IFactory3D One Pro nie jest obecnie, zgodnie z naszą wiedzą, kompatybilny z OctoPrint, Mainsail, Fluidd ani SimplyPrint. Aby zapewnić najlepsze wrażenia z druku 3D, warto rozważyć inne drukarki 3D kompatybilne z tym oprogramowaniem.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
Jakiego slicera użyć do IFactory3D One Pro
Find the best slicing software for your IFactory3D One Pro 3D printer.
Compatible Slicers for IFactory3D One Pro
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the IFactory3D One Pro. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the IFactory3D One Pro.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by IFactory3D—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for IFactory3D One Pro
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your IFactory3D One Pro. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the IFactory3D One Pro print?
A guide to the materials the IFactory3D One Pro can handle, based on its hotend specs.
| Filament | Suitability | Notatki |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Specyfikacja drukarki IFactory3D One Pro: typ stołu, rozmiar, wysokość druku i więcej
Poznaj najważniejsze cechy drukarki 3D IFactory3D One Pro. Od typu stołu po rozmiar, wysokość druku i więcej, podajemy szczegółową specyfikację ułatwiającą zrozumienie możliwości drukarki.
| Specyfikacja | Szczegóły |
|---|---|
| Nazwa modelu drukarki | One Pro |
| Producent / marka drukarki | IFactory3D |
| Typ stołu | Rectangle |
| Rozmiar stołu | 620 x 540 mm |
| Maks. wysokość druku | 380mm |
| Ma podgrzewany stół | Nie |
| Maksymalna temperatura ekstrudera | 285° |
| Szerokość filamentu | 1.75mm |
| Liczba dysz | 1 |
| Sonda / automatyczne poziomowanie stołu | Nie |
| Direct drive | Tak |
| Supports serial printing | Tak |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Najczęściej zadawane pytania
Is the IFactory3D One Pro compatible with SimplyPrint?
To our knowledge the IFactory3D One Pro is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the IFactory3D One Pro?
Cura, PrusaSlicer and OrcaSlicer all work with the IFactory3D One Pro, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the IFactory3D One Pro print?
Based on its specs (hotend up to 285C, no heated bed), the IFactory3D One Pro handles PLA or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
What is the IFactory3D One Pro's build volume?
The IFactory3D One Pro has a build volume of about 620 x 540 x 380 mm. See the full specifications table above for bed type, temperatures and more.
Na zakończenie
To już koniec przewodnika o IFactory3D One Pro. Poświęcamy wiele czasu na badania i gromadzenie danych o jak największej liczbie drukarek 3D, mając świadomość, jak trudno znaleźć wyczerpujące i wiarygodne informacje w jednym miejscu. Skupiamy się przede wszystkim na kompatybilności konkretnych drukarek z najpopularniejszymi programami do druku 3D. Mamy nadzieję, że ten przewodnik pomógł znaleźć odpowiedzi!