Spis treści
Poznaj pełną specyfikację drukarki 3D Copymaster 300 v2, sprawdź jej zgodność z OctoPrint, Mainsail, Fluidd i SimplyPrint oraz dowiedz się, jak skonfigurować każde z nich.
Zgodność drukarki Copymaster 300 v2
Czy drukarka 3D Copymaster 300 v2 działa z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Ustalenie, czy dana drukarka działa z OctoPrint, Mainsail, Fluidd lub SimplyPrint, bywa trudne, zwłaszcza dla początkujących w druku 3D, bo drukarek są tysiące.
Odpowiadamy na pytanie, aby to nieco ułatwić: czy Copymaster 300 v2 jest kompatybilny z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Jakiego slicera użyć do Copymaster 300 v2
Find the best slicing software for your Copymaster 300 v2 3D printer.
Compatible Slicers for Copymaster 300 v2
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Copymaster 300 v2. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the Copymaster 300 v2.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by Copymaster—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Copymaster 300 v2
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Copymaster 300 v2. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Copymaster 300 v2 print?
A guide to the materials the Copymaster 300 v2 can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Notatki |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Specyfikacja drukarki Copymaster 300 v2: typ stołu, rozmiar, wysokość druku i więcej
Poznaj najważniejsze cechy drukarki 3D Copymaster 300 v2. Od typu stołu po rozmiar, wysokość druku i więcej, podajemy szczegółową specyfikację ułatwiającą zrozumienie możliwości drukarki.
| Specyfikacja | Szczegóły |
|---|---|
| Nazwa modelu drukarki | 300 v2 |
| Producent / marka drukarki | Copymaster |
| Typ stołu | Square |
| Rozmiar stołu | 310 x 310 mm |
| Maks. wysokość druku | 350mm |
| Ma podgrzewany stół | Tak |
| Maksymalna temperatura ekstrudera | 270° |
| Maksymalna temperatura stołu | 100° |
| Szerokość filamentu | 1.75mm |
| Liczba dysz | 1 |
| Sonda / automatyczne poziomowanie stołu | Nie |
| Direct drive | Tak |
| Supports serial printing | Tak |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Najczęściej zadawane pytania
Is the Copymaster 300 v2 compatible with SimplyPrint?
Yes. You can connect the Copymaster 300 v2 to SimplyPrint via OctoPrint or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Copymaster 300 v2?
Cura, PrusaSlicer and OrcaSlicer all work with the Copymaster 300 v2, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the Copymaster 300 v2 print?
Based on its specs (hotend up to 270C, heated bed up to 100C), the Copymaster 300 v2 handles PLA, PETG or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Copymaster 300 v2 work with OctoPrint or Klipper?
The Copymaster 300 v2 works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Copymaster 300 v2's build volume?
The Copymaster 300 v2 has a build volume of about 310 x 310 x 350 mm. See the full specifications table above for bed type, temperatures and more.
Na zakończenie
To już koniec przewodnika o Copymaster 300 v2. Poświęcamy wiele czasu na badania i gromadzenie danych o jak największej liczbie drukarek 3D, mając świadomość, jak trudno znaleźć wyczerpujące i wiarygodne informacje w jednym miejscu. Skupiamy się przede wszystkim na kompatybilności konkretnych drukarek z najpopularniejszymi programami do druku 3D. Mamy nadzieję, że ten przewodnik pomógł znaleźć odpowiedzi!