Spis treści
Poznaj pełną specyfikację drukarki 3D Anycubic Kobra 3 V2, sprawdź jej zgodność z OctoPrint, Mainsail, Fluidd i SimplyPrint oraz dowiedz się, jak skonfigurować każde z nich.
Zgodność drukarki Anycubic Kobra 3 V2
Czy drukarka 3D Anycubic Kobra 3 V2 działa z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Ustalenie, czy dana drukarka działa z OctoPrint, Mainsail, Fluidd lub SimplyPrint, bywa trudne, zwłaszcza dla początkujących w druku 3D, bo drukarek są tysiące.
Odpowiadamy na pytanie, aby to nieco ułatwić: czy Anycubic Kobra 3 V2 jest kompatybilny z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Jakiego slicera użyć do Anycubic Kobra 3 V2
Find the best slicing software for your Anycubic Kobra 3 V2 3D printer.
Compatible Slicers for Anycubic Kobra 3 V2
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Anycubic Kobra 3 V2. We are working on adding support for more slicers for our online cloud-based slicer.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Anycubic Kobra 3 V2: Use Cura Online
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Anycubic Kobra 3 V2. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Anycubic Kobra 3 V2 print?
A guide to the materials the Anycubic Kobra 3 V2 can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Notatki |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | The high-temperature hotend and hot bed handle ABS and ASA well. An enclosure helps further on large parts. |
| Nylon (PA) | Dobrze | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Dobrze | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Specyfikacja drukarki Anycubic Kobra 3 V2: typ stołu, rozmiar, wysokość druku i więcej
Poznaj najważniejsze cechy drukarki 3D Anycubic Kobra 3 V2. Od typu stołu po rozmiar, wysokość druku i więcej, podajemy szczegółową specyfikację ułatwiającą zrozumienie możliwości drukarki.
| Specyfikacja | Szczegóły |
|---|---|
| Nazwa modelu drukarki | Kobra 3 V2 |
| Producent / marka drukarki | Anycubic |
| Typ stołu | Square |
| Rozmiar stołu | 255 x 255 mm |
| Maks. wysokość druku | 260mm |
| Ma podgrzewany stół | Tak |
| Maksymalna temperatura ekstrudera | 300° |
| Maksymalna temperatura stołu | 110° |
| Szerokość filamentu | 1.75mm |
| Liczba dysz | 1 |
| Sonda / automatyczne poziomowanie stołu | Nie |
| Direct drive | Tak |
| Supports serial printing | Nie |
| Shipped firmware | Klipper |
| Has start options |
Tak
Available options: Bed Leveling, Vibration Compensation, Flow Calibration, Timelapse |
| Supported file formats | G-code (.gcode, .gco, .g) |
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Najczęściej zadawane pytania
Is the Anycubic Kobra 3 V2 compatible with SimplyPrint?
Yes. You can connect the Anycubic Kobra 3 V2 to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Anycubic Kobra 3 V2?
We recommend Cura for the Anycubic Kobra 3 V2. You can run it (plus Cura, PrusaSlicer and OrcaSlicer) directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Anycubic Kobra 3 V2 kept up to date automatically.
What filament can the Anycubic Kobra 3 V2 print?
Based on its specs (hotend up to 300C, heated bed up to 110C), the Anycubic Kobra 3 V2 handles PLA, PETG, TPU & flexibles or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Anycubic Kobra 3 V2 work with OctoPrint or Klipper?
The Anycubic Kobra 3 V2 works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Anycubic Kobra 3 V2's build volume?
The Anycubic Kobra 3 V2 has a build volume of about 255 x 255 x 260 mm. See the full specifications table above for bed type, temperatures and more.
Na zakończenie
To już koniec przewodnika o Anycubic Kobra 3 V2. Poświęcamy wiele czasu na badania i gromadzenie danych o jak największej liczbie drukarek 3D, mając świadomość, jak trudno znaleźć wyczerpujące i wiarygodne informacje w jednym miejscu. Skupiamy się przede wszystkim na kompatybilności konkretnych drukarek z najpopularniejszymi programami do druku 3D. Mamy nadzieję, że ten przewodnik pomógł znaleźć odpowiedzi!