Spis treści
Poznaj pełną specyfikację drukarki 3D Anet ET4+, sprawdź jej zgodność z OctoPrint, Mainsail, Fluidd i SimplyPrint oraz dowiedz się, jak skonfigurować każde z nich.
Zgodność drukarki Anet ET4+
Czy drukarka 3D Anet ET4+ działa z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Ustalenie, czy dana drukarka działa z OctoPrint, Mainsail, Fluidd lub SimplyPrint, bywa trudne, zwłaszcza dla początkujących w druku 3D, bo drukarek są tysiące.
Odpowiadamy na pytanie, aby to nieco ułatwić: czy Anet ET4+ jest kompatybilny z OctoPrint, Mainsail, Fluidd i SimplyPrint?
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Jakiego slicera użyć do Anet ET4+
Find the best slicing software for your Anet ET4+ 3D printer.
Compatible Slicers for Anet ET4+
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Anet ET4+. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the Anet ET4+.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by Anet—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Anet ET4+
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Anet ET4+. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Anet ET4+ print?
A guide to the materials the Anet ET4+ can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Notatki |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Specyfikacja drukarki Anet ET4+: typ stołu, rozmiar, wysokość druku i więcej
Poznaj najważniejsze cechy drukarki 3D Anet ET4+. Od typu stołu po rozmiar, wysokość druku i więcej, podajemy szczegółową specyfikację ułatwiającą zrozumienie możliwości drukarki.
| Specyfikacja | Szczegóły |
|---|---|
| Nazwa modelu drukarki | ET4+ |
| Producent / marka drukarki | Anet |
| Typ stołu | Square |
| Rozmiar stołu | 220 x 220 mm |
| Maks. wysokość druku | 250mm |
| Ma podgrzewany stół | Tak |
| Maksymalna temperatura ekstrudera | 250° |
| Maksymalna temperatura stołu | 100° |
| Szerokość filamentu | 1.75mm |
| Liczba dysz | 1 |
| Sonda / automatyczne poziomowanie stołu | Nie |
| Direct drive | Nie |
| Supports serial printing | Tak |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Czy popełniliśmy błąd? Któreś z tych danych są nieprawidłowe? Daj nam znać!
Najczęściej zadawane pytania
Is the Anet ET4+ compatible with SimplyPrint?
Yes. You can connect the Anet ET4+ to SimplyPrint via OctoPrint or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Anet ET4+?
Cura, PrusaSlicer and OrcaSlicer all work with the Anet ET4+, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the Anet ET4+ print?
Based on its specs (hotend up to 250C, heated bed up to 100C), the Anet ET4+ handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Anet ET4+ work with OctoPrint or Klipper?
The Anet ET4+ works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Anet ET4+'s build volume?
The Anet ET4+ has a build volume of about 220 x 220 x 250 mm. See the full specifications table above for bed type, temperatures and more.
Na zakończenie
To już koniec przewodnika o Anet ET4+. Poświęcamy wiele czasu na badania i gromadzenie danych o jak największej liczbie drukarek 3D, mając świadomość, jak trudno znaleźć wyczerpujące i wiarygodne informacje w jednym miejscu. Skupiamy się przede wszystkim na kompatybilności konkretnych drukarek z najpopularniejszymi programami do druku 3D. Mamy nadzieję, że ten przewodnik pomógł znaleźć odpowiedzi!