Innholdsfortegnelse
Lær alt om spesifikasjonene til JGMaker/JGAurora Magic 3D-printeren, om den er kompatibel med OctoPrint, Mainsail, Fluidd og SimplyPrint, og hvordan du setter opp hver av dem.
Printerkompatibilitet for JGMaker/JGAurora Magic
Fungerer JGMaker/JGAurora Magic 3D-printeren med OctoPrint, Mainsail, Fluidd og SimplyPrint?
Å finne ut om akkurat printeren din fungerer med OctoPrint, Mainsail, Fluidd eller SimplyPrint, kan være en utfordrende oppgave, spesielt hvis du er ny innen 3D-printing, siden det finnes tusenvis av printere der ute.
Vi er her for å gjøre det litt enklere for deg, ved å svare på spørsmålet: er JGMaker/JGAurora Magic kompatibel med OctoPrint, Mainsail, Fluidd og SimplyPrint?
Har vi gjort en feil? Er noe av denne dataen feil? Si ifra!
Hvilken slicer du bør bruke til JGMaker/JGAurora Magic
Find the best slicing software for your JGMaker/JGAurora Magic 3D printer.
Compatible Slicers for JGMaker/JGAurora Magic
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the JGMaker/JGAurora Magic. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the JGMaker/JGAurora Magic.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by JGMaker/JGAurora—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for JGMaker/JGAurora Magic
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your JGMaker/JGAurora Magic. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the JGMaker/JGAurora Magic print?
A guide to the materials the JGMaker/JGAurora Magic can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Notater |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
JGMaker/JGAurora Magic-printerspesifikasjoner: printplatetype, størrelse, printhøyde og mer
Oppdag nøkkelfunksjonene til JGMaker/JGAurora Magic 3D-printermodellen. Fra printplatetype til størrelse, printhøyde og mer, gir vi deg detaljerte spesifikasjoner som hjelper deg med å forstå printerens muligheter.
| Attributt | Detaljer |
|---|---|
| Printermodellnavn | Magic |
| Printerprodusent / merke | JGMaker/JGAurora |
| Bed-type | Square |
| Bed-størrelse | 220 x 220 mm |
| Maks. printhøyde | 250mm |
| Har oppvarmet plate | Ja |
| Maks. ekstrudertemperatur | 245° |
| Maks. platetemperatur | 110° |
| Filamentbredde | 1.75mm |
| Antall dyser | 1 |
| Probing tool / Auto Bed Leveling | Nei |
| Direct drive | Nei |
| Supports serial printing | Ja |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Har vi gjort en feil? Er noe av denne dataen feil? Si ifra!
Ofte stilte spørsmål
Is the JGMaker/JGAurora Magic compatible with SimplyPrint?
Yes. You can connect the JGMaker/JGAurora Magic to SimplyPrint via OctoPrint or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the JGMaker/JGAurora Magic?
Cura, PrusaSlicer and OrcaSlicer all work with the JGMaker/JGAurora Magic, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the JGMaker/JGAurora Magic print?
Based on its specs (hotend up to 245C, heated bed up to 110C), the JGMaker/JGAurora Magic handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.
Does the JGMaker/JGAurora Magic work with OctoPrint or Klipper?
The JGMaker/JGAurora Magic works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the JGMaker/JGAurora Magic's build volume?
The JGMaker/JGAurora Magic has a build volume of about 220 x 220 x 250 mm. See the full specifications table above for bed type, temperatures and more.
Avsluttende ord
Vi har nådd slutten av informasjonsguiden vår for JGMaker/JGAurora Magic. Vi bruker betydelig tid på å forske på og samle inn data om så mange 3D-skrivere som mulig, med forståelse for utfordringen ved å finne omfattende og pålitelig informasjon på ett sted. Hovedfokuset vårt er å gi innsikt i hvordan spesifikke skrivere er kompatible med de mest populære 3D-printklientene. Vi håper denne guiden har hjulpet med å svare på spørsmålene dine!