Innholdsfortegnelse
Lær alt om spesifikasjonene til Flashforge Inventor II S 3D-printeren, om den er kompatibel med OctoPrint, Mainsail, Fluidd og SimplyPrint, og hvordan du setter opp hver av dem.
Printerkompatibilitet for Flashforge Inventor II S
Fungerer Flashforge Inventor II S 3D-printeren med OctoPrint, Mainsail, Fluidd og SimplyPrint?
Å finne ut om akkurat printeren din fungerer med OctoPrint, Mainsail, Fluidd eller SimplyPrint, kan være en utfordrende oppgave, spesielt hvis du er ny innen 3D-printing, siden det finnes tusenvis av printere der ute.
Vi er her for å gjøre det litt enklere for deg, ved å svare på spørsmålet: er Flashforge Inventor II S kompatibel med OctoPrint, Mainsail, Fluidd og SimplyPrint?
Har vi gjort en feil? Er noe av denne dataen feil? Si ifra!
Hvilken slicer du bør bruke til Flashforge Inventor II S
Find the best slicing software for your Flashforge Inventor II S 3D printer.
Compatible Slicers for Flashforge Inventor II S
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Flashforge Inventor II S. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the Flashforge Inventor II S.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by Flashforge—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Flashforge Inventor II S
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Flashforge Inventor II S. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Flashforge Inventor II S print?
A guide to the materials the Flashforge Inventor II S can handle, based on its hotend specs.
| Filament | Suitability | Notater |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Flashforge Inventor II S-printerspesifikasjoner: printplatetype, størrelse, printhøyde og mer
Oppdag nøkkelfunksjonene til Flashforge Inventor II S 3D-printermodellen. Fra printplatetype til størrelse, printhøyde og mer, gir vi deg detaljerte spesifikasjoner som hjelper deg med å forstå printerens muligheter.
| Attributt | Detaljer |
|---|---|
| Printermodellnavn | Inventor II S |
| Printerprodusent / merke | Flashforge |
| Bed-type | Square |
| Bed-størrelse | 140 x 140 mm |
| Maks. printhøyde | 150mm |
| Har oppvarmet plate | Nei |
| Maks. ekstrudertemperatur | 240° |
| Filamentbredde | 1.75mm |
| Antall dyser | 1 |
| Probing tool / Auto Bed Leveling | Nei |
| Direct drive | Nei |
| Supports serial printing | Ja |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Har vi gjort en feil? Er noe av denne dataen feil? Si ifra!
Ofte stilte spørsmål
Is the Flashforge Inventor II S compatible with SimplyPrint?
Yes. You can connect the Flashforge Inventor II S to SimplyPrint via OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Flashforge Inventor II S?
Cura, PrusaSlicer and OrcaSlicer all work with the Flashforge Inventor II S, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the Flashforge Inventor II S print?
Based on its specs (hotend up to 240C, no heated bed), the Flashforge Inventor II S handles PLA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Flashforge Inventor II S work with OctoPrint or Klipper?
The Flashforge Inventor II S works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Flashforge Inventor II S's build volume?
The Flashforge Inventor II S has a build volume of about 140 x 140 x 150 mm. See the full specifications table above for bed type, temperatures and more.
Avsluttende ord
Vi har nådd slutten av informasjonsguiden vår for Flashforge Inventor II S. Vi bruker betydelig tid på å forske på og samle inn data om så mange 3D-skrivere som mulig, med forståelse for utfordringen ved å finne omfattende og pålitelig informasjon på ett sted. Hovedfokuset vårt er å gi innsikt i hvordan spesifikke skrivere er kompatible med de mest populære 3D-printklientene. Vi håper denne guiden har hjulpet med å svare på spørsmålene dine!