Innholdsfortegnelse
Lær alt om spesifikasjonene til Flashforge Guider II S 3D-printeren, om den er kompatibel med OctoPrint, Mainsail, Fluidd og SimplyPrint, og hvordan du setter opp hver av dem.
Printerkompatibilitet for Flashforge Guider II S
Fungerer Flashforge Guider II S 3D-printeren med OctoPrint, Mainsail, Fluidd og SimplyPrint?
Å finne ut om akkurat printeren din fungerer med OctoPrint, Mainsail, Fluidd eller SimplyPrint, kan være en utfordrende oppgave, spesielt hvis du er ny innen 3D-printing, siden det finnes tusenvis av printere der ute.
Vi er her for å gjøre det litt enklere for deg, ved å svare på spørsmålet: er Flashforge Guider II S kompatibel med OctoPrint, Mainsail, Fluidd og SimplyPrint?
Har vi gjort en feil? Er noe av denne dataen feil? Si ifra!
Hvilken slicer du bør bruke til Flashforge Guider II S
Find the best slicing software for your Flashforge Guider II S 3D printer.
Compatible Slicers for Flashforge Guider II S
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Flashforge Guider II S. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the Flashforge Guider II S.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by Flashforge—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Flashforge Guider II S
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Flashforge Guider II S. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Flashforge Guider II S print?
A guide to the materials the Flashforge Guider II S can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Notater |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | The high-temperature hotend and hot bed handle ABS and ASA well. An enclosure helps further on large parts. |
| Nylon (PA) | Bra | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Bra | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Flashforge Guider II S-printerspesifikasjoner: printplatetype, størrelse, printhøyde og mer
Oppdag nøkkelfunksjonene til Flashforge Guider II S 3D-printermodellen. Fra printplatetype til størrelse, printhøyde og mer, gir vi deg detaljerte spesifikasjoner som hjelper deg med å forstå printerens muligheter.
| Attributt | Detaljer |
|---|---|
| Printermodellnavn | Guider II S |
| Printerprodusent / merke | Flashforge |
| Bed-type | Rectangle |
| Bed-størrelse | 280 x 250 mm |
| Maks. printhøyde | 300mm |
| Har oppvarmet plate | Ja |
| Maks. ekstrudertemperatur | 300° |
| Maks. platetemperatur | 120° |
| Filamentbredde | 1.75mm |
| Antall dyser | 1 |
| Probing tool / Auto Bed Leveling | Ja |
| Direct drive | Ja |
| Supports serial printing | Ja |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Har vi gjort en feil? Er noe av denne dataen feil? Si ifra!
Ofte stilte spørsmål
Is the Flashforge Guider II S compatible with SimplyPrint?
Yes. You can connect the Flashforge Guider II S to SimplyPrint via OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Flashforge Guider II S?
Cura, PrusaSlicer and OrcaSlicer all work with the Flashforge Guider II S, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the Flashforge Guider II S print?
Based on its specs (hotend up to 300C, heated bed up to 120C), the Flashforge Guider II S handles PLA, PETG, TPU & flexibles or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Flashforge Guider II S work with OctoPrint or Klipper?
The Flashforge Guider II S works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Flashforge Guider II S's build volume?
The Flashforge Guider II S has a build volume of about 280 x 250 x 300 mm. See the full specifications table above for bed type, temperatures and more.
Avsluttende ord
Vi har nådd slutten av informasjonsguiden vår for Flashforge Guider II S. Vi bruker betydelig tid på å forske på og samle inn data om så mange 3D-skrivere som mulig, med forståelse for utfordringen ved å finne omfattende og pålitelig informasjon på ett sted. Hovedfokuset vårt er å gi innsikt i hvordan spesifikke skrivere er kompatible med de mest populære 3D-printklientene. Vi håper denne guiden har hjulpet med å svare på spørsmålene dine!