Innholdsfortegnelse
Lær alt om spesifikasjonene til Anycubic Chiron 3D-printeren, om den er kompatibel med OctoPrint, Mainsail, Fluidd og SimplyPrint, og hvordan du setter opp hver av dem.
Printerkompatibilitet for Anycubic Chiron
Fungerer Anycubic Chiron 3D-printeren med OctoPrint, Mainsail, Fluidd og SimplyPrint?
Å finne ut om akkurat printeren din fungerer med OctoPrint, Mainsail, Fluidd eller SimplyPrint, kan være en utfordrende oppgave, spesielt hvis du er ny innen 3D-printing, siden det finnes tusenvis av printere der ute.
Vi er her for å gjøre det litt enklere for deg, ved å svare på spørsmålet: er Anycubic Chiron kompatibel med OctoPrint, Mainsail, Fluidd og SimplyPrint?
Har vi gjort en feil? Er noe av denne dataen feil? Si ifra!
Hvilken slicer du bør bruke til Anycubic Chiron
Find the best slicing software for your Anycubic Chiron 3D printer.
Compatible Slicers for Anycubic Chiron
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Anycubic Chiron. We are working on adding support for more slicers for our online cloud-based slicer.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Anycubic Chiron: Use OrcaSlicer Online
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Anycubic Chiron. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Anycubic Chiron print?
A guide to the materials the Anycubic Chiron can handle, based on its hotend and heated bed specs.
| Filament | Suitability | Notater |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Anycubic Chiron-printerspesifikasjoner: printplatetype, størrelse, printhøyde og mer
Oppdag nøkkelfunksjonene til Anycubic Chiron 3D-printermodellen. Fra printplatetype til størrelse, printhøyde og mer, gir vi deg detaljerte spesifikasjoner som hjelper deg med å forstå printerens muligheter.
| Attributt | Detaljer |
|---|---|
| Printermodellnavn | Chiron |
| Printerprodusent / merke | Anycubic |
| Bed-type | Square |
| Bed-størrelse | 400 x 400 mm |
| Maks. printhøyde | 450mm |
| Har oppvarmet plate | Ja |
| Maks. ekstrudertemperatur | 250° |
| Maks. platetemperatur | 100° |
| Filamentbredde | 1.75mm |
| Antall dyser | 1 |
| Probing tool / Auto Bed Leveling | Nei |
| Direct drive | Nei |
| Supports serial printing | Ja |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Har vi gjort en feil? Er noe av denne dataen feil? Si ifra!
Ofte stilte spørsmål
Is the Anycubic Chiron compatible with SimplyPrint?
Yes. You can connect the Anycubic Chiron to SimplyPrint via OctoPrint or Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
What slicer should I use for the Anycubic Chiron?
We recommend OrcaSlicer for the Anycubic Chiron. You can run it (plus Cura, PrusaSlicer and OrcaSlicer) directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Anycubic Chiron kept up to date automatically.
What filament can the Anycubic Chiron print?
Based on its specs (hotend up to 250C, heated bed up to 100C), the Anycubic Chiron handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Anycubic Chiron work with OctoPrint or Klipper?
The Anycubic Chiron works with OctoPrint or Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Anycubic Chiron's build volume?
The Anycubic Chiron has a build volume of about 400 x 400 x 450 mm. See the full specifications table above for bed type, temperatures and more.
Avsluttende ord
Vi har nådd slutten av informasjonsguiden vår for Anycubic Chiron. Vi bruker betydelig tid på å forske på og samle inn data om så mange 3D-skrivere som mulig, med forståelse for utfordringen ved å finne omfattende og pålitelig informasjon på ett sted. Hovedfokuset vårt er å gi innsikt i hvordan spesifikke skrivere er kompatible med de mest populære 3D-printklientene. Vi håper denne guiden har hjulpet med å svare på spørsmålene dine!