Indice dei contenuti
Tutte le informazioni sulle specifiche della stampante 3D IFactory3D One Pro: la compatibilità con OctoPrint, Mainsail, Fluidd e SimplyPrint, e come configurare ciascuno di essi.
Compatibilità della stampante per IFactory3D One Pro
La stampante 3D IFactory3D One Pro funziona con OctoPrint, Mainsail, Fluidd e SimplyPrint?
Stabilire se una determinata stampante funziona con OctoPrint, Mainsail, Fluidd o SimplyPrint può essere un compito impegnativo, specialmente per chi è alle prime armi con la stampa 3D, dato che esistono migliaia di stampanti diverse.
L'obiettivo è semplificare le cose rispondendo alla domanda: la IFactory3D One Pro è compatibile con OctoPrint, Mainsail, Fluidd e SimplyPrint?
Abbiamo commesso un errore? C'è qualche dato sbagliato? Segnalarcelo!
Nessuna compatibilità attuale
Purtroppo, IFactory3D One Pro al momento non risulta compatibile, per quanto ne sappiamo, con OctoPrint, Mainsail, Fluidd o SimplyPrint. Per la migliore esperienza di stampa 3D, prendere in considerazione altre stampanti 3D compatibili con questi software.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
Quale slicer usare per la IFactory3D One Pro
Find the best slicing software for your IFactory3D One Pro 3D printer.
Compatible Slicers for IFactory3D One Pro
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the IFactory3D One Pro. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the IFactory3D One Pro.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by IFactory3D—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for IFactory3D One Pro
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your IFactory3D One Pro. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the IFactory3D One Pro print?
A guide to the materials the IFactory3D One Pro can handle, based on its hotend specs.
| Filamento | Suitability | Note |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Specifiche della stampante IFactory3D One Pro: tipo di piano di stampa, dimensioni, altezza di stampa e altro
Scoprire le caratteristiche principali del modello di stampante 3D IFactory3D One Pro. Dal tipo di piano di stampa alle dimensioni, all'altezza di stampa e altro ancora, vengono fornite specifiche dettagliate per comprendere le capacità della stampante.
| Specifica | Dettagli |
|---|---|
| Nome del modello di stampante | One Pro |
| Produttore / marca della stampante | IFactory3D |
| Tipo di piano di stampa | Rectangle |
| Dimensioni del piano di stampa | 620 x 540 mm |
| Altezza massima di stampa | 380mm |
| Ha piano riscaldato | No |
| Temperatura massima dell'estrusore | 285° |
| Larghezza del filamento | 1.75mm |
| Numero di ugelli | 1 |
| Strumento di sondaggio / livellamento automatico del piano di stampa | No |
| Direct drive | Sì |
| Supports serial printing | Sì |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Abbiamo commesso un errore? C'è qualche dato sbagliato? Segnalarcelo!
Domande frequenti
Is the IFactory3D One Pro compatible with SimplyPrint?
To our knowledge the IFactory3D One Pro is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the IFactory3D One Pro?
Cura, PrusaSlicer and OrcaSlicer all work with the IFactory3D One Pro, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the IFactory3D One Pro print?
Based on its specs (hotend up to 285C, no heated bed), the IFactory3D One Pro handles PLA or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
What is the IFactory3D One Pro's build volume?
The IFactory3D One Pro has a build volume of about 620 x 540 x 380 mm. See the full specifications table above for bed type, temperatures and more.
Considerazioni finali
Siamo giunti alla fine della guida informativa sulla IFactory3D One Pro. Viene dedicato molto tempo alla ricerca e alla raccolta di dati su quante più stampanti 3D possibile, consapevoli della difficoltà di trovare informazioni complete e affidabili in un unico posto. L'obiettivo principale è fornire indicazioni sulla compatibilità di stampanti specifiche con i client di stampa 3D più diffusi. Si spera che questa guida abbia aiutato a rispondere alle domande!