विषय सूची
IFactory3D One Pro 3D प्रिंटर की सभी स्पेसिफ़िकेशन के बारे में जानें, क्या यह OctoPrint, Mainsail, Fluidd और SimplyPrint के साथ कम्पैटिबल है, और हर एक को कैसे सेट अप करें।
IFactory3D One Pro के लिए प्रिंटर संगतता
क्या IFactory3D One Pro 3D प्रिंटर OctoPrint, Mainsail, Fluidd और SimplyPrint के साथ काम करता है?
यह पता लगाना कि आपका खास प्रिंटर OctoPrint, Mainsail, Fluidd या SimplyPrint के साथ काम करता है या नहीं, एक मुश्किल काम हो सकता है, खासकर अगर आप 3D प्रिंटिंग में नए हैं, क्योंकि वहां हज़ारों प्रिंटर मौजूद हैं।
हम इस सवाल का जवाब देकर इसे आपके लिए थोड़ा आसान बनाने के लिए यहां हैं; क्या IFactory3D One Pro, OctoPrint, Mainsail, Fluidd और SimplyPrint के साथ संगत है?
क्या हमसे कोई गलती हुई? क्या यह कोई डेटा गलत है? हमें बताएं!
फ़िलहाल कोई संगतता नहीं
दुर्भाग्य से, हमारी जानकारी के मुताबिक IFactory3D One Pro फ़िलहाल OctoPrint, Mainsail, Fluidd, या SimplyPrint के साथ संगत नहीं है। सबसे अच्छे 3D प्रिंटिंग अनुभव के लिए, ऐसे अन्य 3D प्रिंटर पर विचार करें जो इन सॉफ़्टवेयर के साथ संगत हों।
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
IFactory3D One Pro के लिए कौन सा स्लाइसर इस्तेमाल करें
Find the best slicing software for your IFactory3D One Pro 3D printer.
Compatible Slicers for IFactory3D One Pro
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the IFactory3D One Pro. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the IFactory3D One Pro.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by IFactory3D—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for IFactory3D One Pro
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your IFactory3D One Pro. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the IFactory3D One Pro print?
A guide to the materials the IFactory3D One Pro can handle, based on its hotend specs.
| फिलामेंट | Suitability | नोट्स |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
IFactory3D One Pro प्रिंटर स्पेसिफिकेशन: बेड टाइप, साइज़, प्रिंट हाइट और अधिक
IFactory3D One Pro 3D प्रिंटर मॉडल के मुख्य फीचर के बारे में जानें। इसके बेड टाइप से लेकर साइज़, प्रिंट ऊंचाई, और भी बहुत कुछ, हम आपको प्रिंटर की क्षमताएं समझने में मदद के लिए विस्तृत स्पेसिफिकेशन देते हैं।
| स्पेसिफिकेशन | विवरण |
|---|---|
| प्रिंटर मॉडल नाम | One Pro |
| प्रिंटर निर्माता / ब्रांड | IFactory3D |
| बेड टाइप | Rectangle |
| बेड साइज़ | 620 x 540 mm |
| अधिकतम प्रिंट ऊंचाई | 380mm |
| हीटेड बेड है | नहीं |
| अधिकतम एक्सट्रूडर तापमान | 285° |
| फिलामेंट की चौड़ाई | 1.75mm |
| नोज़ल की संख्या | 1 |
| प्रोबिंग टूल / ऑटो बेड लेवलिंग | नहीं |
| डायरेक्ट ड्राइव | हां |
| Supports serial printing | हां |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
क्या हमसे कोई गलती हुई? क्या यह कोई डेटा गलत है? हमें बताएं!
अक्सर पूछे जाने वाले सवाल
Is the IFactory3D One Pro compatible with SimplyPrint?
To our knowledge the IFactory3D One Pro is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the IFactory3D One Pro?
Cura, PrusaSlicer and OrcaSlicer all work with the IFactory3D One Pro, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the IFactory3D One Pro print?
Based on its specs (hotend up to 285C, no heated bed), the IFactory3D One Pro handles PLA or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
What is the IFactory3D One Pro's build volume?
The IFactory3D One Pro has a build volume of about 620 x 540 x 380 mm. See the full specifications table above for bed type, temperatures and more.
आखिरी शब्द
हम अपनी IFactory3D One Pro जानकारी गाइड के आखिर में पहुंच गए हैं। हम ज़्यादा से ज़्यादा 3D प्रिंटरों पर रिसर्च करने और डेटा जुटाने में काफ़ी समय लगाते हैं, क्योंकि हम समझते हैं कि एक ही जगह पर पूरी, भरोसेमंद जानकारी ढूंढना कितना मुश्किल है। हमारा मुख्य फ़ोकस खास प्रिंटरों की सबसे लोकप्रिय 3D प्रिंटिंग क्लाइंट के साथ संगतता की जानकारी देना है। हमें उम्मीद है इस गाइड ने आपके सवालों के जवाब देने में मदद की!