Table des matières
Découvrez tout sur les caractéristiques de l’imprimante 3D Flashforge Finder 3, sa compatibilité avec OctoPrint, Mainsail, Fluidd et SimplyPrint, et la façon de configurer chacun d’eux.
Compatibilité de l’imprimante Flashforge Finder 3
L’imprimante 3D Flashforge Finder 3 fonctionne-t-elle avec OctoPrint, Mainsail, Fluidd et SimplyPrint ?
Déterminer si votre imprimante fonctionne avec OctoPrint, Mainsail, Fluidd ou SimplyPrint peut s’avérer compliqué, surtout si vous débutez en impression 3D, car il existe des milliers d’imprimantes.
Nous sommes là pour vous faciliter un peu la tâche en répondant à la question : la Flashforge Finder 3 est-elle compatible avec OctoPrint, Mainsail, Fluidd et SimplyPrint ?
Nous nous sommes trompés ? Une de ces données est incorrecte ? Dites-le-nous !
Aucune compatibilité actuelle
Malheureusement, à notre connaissance, l’imprimante Flashforge Finder 3 n’est actuellement pas compatible avec OctoPrint, Mainsail, Fluidd ou SimplyPrint. Pour la meilleure expérience d’impression 3D, envisagez d’autres imprimantes 3D compatibles avec ces logiciels.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
Quel slicer utiliser pour la Flashforge Finder 3
Find the best slicing software for your Flashforge Finder 3 3D printer.
Compatible Slicers for Flashforge Finder 3
At SimplyPrint we support the following 7 slicers. But, that does not mean that no other slicers are compatible with this the Flashforge Finder 3. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the Flashforge Finder 3.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by Flashforge—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Flashforge Finder 3
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Flashforge Finder 3. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the Flashforge Finder 3 print?
A guide to the materials the Flashforge Finder 3 can handle, based on its hotend specs.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Caractéristiques de l’imprimante Flashforge Finder 3 : type de plateau, dimensions, hauteur d’impression et plus encore
Découvrez les principales caractéristiques du modèle d’imprimante 3D Flashforge Finder 3. Du type de plateau à la taille, en passant par la hauteur d’impression et plus encore, nous fournissons des spécifications détaillées pour vous aider à comprendre les capacités de l’imprimante.
| Caractéristiques | Détails |
|---|---|
| Nom du modèle d’imprimante | Finder 3 |
| Fabricant / marque de l’imprimante | Flashforge |
| Type de plateau | Rectangle |
| Taille du plateau | 190 x 195 mm |
| Hauteur d’impression max. | 200mm |
| Avec plateau chauffant | Non |
| Température max. de l’extrudeur | 260° |
| Largeur du filament | 1.75mm |
| Nombre de buses | 1 |
| Outil de palpage / nivellement automatique du plateau | Non |
| Direct drive | Oui |
| Supports serial printing | Oui |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Nous nous sommes trompés ? Une de ces données est incorrecte ? Dites-le-nous !
Questions fréquentes
Is the Flashforge Finder 3 compatible with SimplyPrint?
To our knowledge the Flashforge Finder 3 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the Flashforge Finder 3?
Cura, PrusaSlicer and OrcaSlicer all work with the Flashforge Finder 3, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the Flashforge Finder 3 print?
Based on its specs (hotend up to 260C, no heated bed), the Flashforge Finder 3 handles PLA or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
What is the Flashforge Finder 3's build volume?
The Flashforge Finder 3 has a build volume of about 190 x 195 x 200 mm. See the full specifications table above for bed type, temperatures and more.
Pour conclure
Nous voici à la fin de notre guide d’informations sur la Flashforge Finder 3. Nous consacrons beaucoup de temps à rechercher et à rassembler des données sur le plus grand nombre possible d’imprimantes 3D, conscients de la difficulté à trouver des informations complètes et fiables au même endroit. Notre objectif principal est de renseigner sur la compatibilité de certaines imprimantes avec les clients d’impression 3D les plus populaires. Nous espérons que ce guide a répondu à vos questions !